Heavy rescue hydraulic lifting sets 

Heavy rescue hydraulic lifting sets 

Model: HS12/0.8-A

It’s suitable for emergency rescue tools on site such as earthquakes, landslides, tunnels, mudslides, landslides, and various traffic accident handling. It can be used alone, or use two triangular heads to connect the three ejector rods together to increase the supporting force; in addition, multiple ejector rods can be connected to form a tripod for rescue lifting or lifting.

Description 

1. Pneumatic support rod:

2. Handheld pneumatic controller:

Product model SKQ-II

Quality (Kg): 1.3

Working pressure (MPa): 0.8

(1) It has single-pass single-control, double-pass dual-control (simultaneous or separate control), and multiple "handheld pneumatic controllers" can also be used in series with each other to meet the diversity of product operations;

(2) One gas source can be connected alone or two gas sources can be connected in series at the same time to ensure the adequacy of the gas source;

(3) It can monitor the working pressure of the product in real time when inflating or working, and grasp the working dynamics of the product in time;

(4) Safety guarantee. When the working pressure is exceeded, the safety valve opens automatically, which effectively guarantees the safety of personnel and products;

3. Universal rotating base:

Add to the base or top of the support rod, or on the extension rod. 360° range full-angle use: It has a 90° horizontal support angle, a 45° diagonal support angle, and the other angles are any inclination angles within 30°; there are 8 nail holes on the edge of the base, which can be nailed to the object. It can be connected to the "multifunctional board" to enlarge the force-bearing area and prevent sinking.

4. Multi-function board: used to enlarge the force-bearing area, suitable for soft and muddy ground, prevent collapse, and have a variety of fixing methods.

5. Coupling: used to connect the "multifunctional board" and the "universal rotating base" together.

6. Three supporting rods combined base (2 pcs): every two bases can be fixedly connected to three supporting rods as a whole; further amplify the safe working support force of the supporting rods.

7. Ratchet fastening straps with hooks (4 pcs): used to pull the "multi-function board" and the "three-rod joint base" to other fixed objects.

8. Crown supports (2 pcs)/rhino horn supports (2 pcs)/U-shaped beam supports (2 pcs)/L-shaped beam supports (2 pcs), with serrated design on the surface to enhance friction; different shapes are suitable for various rescue sites: it can be quickly connected to the top of a pneumatic support rod or an extension rod.

9. Multi-purpose tool (1 pc): It can be used to the base of the rotated support rod, and has various functions such as nail remover, chisel, hammer, and crowbar.

10. Pressure regulating valve (1 pc): adjust the pressure of the 30MPa cylinder to 0.8MPa.

11. Air pipes (3 pcs): each support rod needs 1 pair (2 pcs, red and blue matching), each 10 meters long, and 1 pipe (blue 5 meters long) connecting the pressure regulating valve and the "handheld pneumatic controller" .

12. Optional tripod connector: The support rod can be assembled into a tripod by using the tripod connector.

Packing list